Work with us

CAREERS

OPEN POSITIONS

  • Laborer: 
    • Employee will complete the common tasks below:
      • Installing different types geosynthetic materials to include physically pulling materials into place for seaming.
      • Repeatedly lifting, carrying, filling sand bags weighing 50-75 pounds, and cleaning up scraps/trash from job site. 
    • Work in groups of four or more people deploying geosynthetic products.
      • Steps include:
        • Pulling panels geosynthetics in place by hand. An example would be a panel on HDPE membrane 23’ x 300’.
        • Setting overlap (moving panels up to 6 inches) by hand.
        • Ballasting geosynthetics utilizing filled sandbags. Move and place sandbags on panel edges.
    • Install geosynthetics at different projects in accordance with established standards and procedures; always maintains safety and professionalism.
  • Laborer Level 2: 
    • The employee can use a leister and grinder efficiently in the process of welding polyethylene geomembrane.
    • The employee demonstrates general knowledge of the installation sequence of geosynthetics.
    • The employee has received a knife use evaluation from immediate supervisor.
    • Employee has not received any disciplinary actions in the past 90 days.

Definitions of Tech Level:

  • Tech Level 1: 
    • Employee can Leister, grind, test samples using a tensiometer and weld using extruder and wedge welder with assistance from higher level technician.
    • Employee may receive guidance in machine set up from higher tech level, but they must weld samples themselves.

 

  • Tech Level 2: 
    • Employee must meet Tech Level 1.
    • Employee must be able to use a sewing machine with no assistance. 
    • Employee can leister, grind, test samples using a tensiometer and weld using extruder and wedge welder with no assistance.  
    • Employee must be able to set up extrusion and fusion welding machine from a blank state for two different types of polyethylene geomembrane. 
    • To maintain Tech Level 2 status, employee must have a minimum of two consecutive months with no failed destructs with no more than three failed destructs during any calendar year.

 

  • Tech Level 3:  
    • Employee must meet Tech Level 2 criteria.
    • Employee must be able to set up both extrusion and fusion welding machines from blank state for three different types of geomembrane.
      • Polyethylene
      • PVC
      • RPP
    • To maintain Tech Level 3 status, employee must have three consecutive months with no failed destructs with no more than two failed destructs during any calendar year.

 

  • Master Seamer: 
    • Employee must meet Tech Level 3 criteria.
    • Employee must pass welding proctor consisting of 5 peels and 5 shears with the following type of geomembrane:
      • RPE
      • XR-5
      • 20 mil scrim reinforced 
    • Employee must be an IAGI certified welding technician.
    • To maintain Master Seamer status, employee must have nine consecutive months with no failed destructs with no more than one failed destruct during any calendar year.
  • Foreman: 
    • Employee must be meet the Tech 3 criteria.
    • Employee must be an approved driver.
    • Employee must be certified and proficient at operating the following equipment:
      • Forklift
      • Excavator
      • Skid steer
      • UTV
    • Employee must have a minimum of 5,000,000 SF of geomembrane installation experience on their resume.
  • QC in Training: 
      • 3-6 months of geomembrane installation experience
      • Meet Tech Level 1 requirements
      • Basic computer skills:
        • Microsoft Excel
        • Microsoft Word
        • Microsoft Outlook
      • Employees will spend approximately 6 months in QCIT role learning the systems and processes of being a Quality Control Technician. 
  • QC Level 1: 
  • Employee must be proficient in Microsoft Excel and Outlook.
  • Employee must have the ability to complete record drawings with the assistance from higher level QC.
  • Employee must have a minimum of 1,000,000 SF of geomembrane installation on their resume.
  •  QC Level 2: 
  • Employee must meet QC Level 1 criteria.
  • Employee must be proficient in the use of software with no assistance from higher level of operator.
  • Employee has ability to complete all daily required paperwork.
  • Employee must be an approved driver.
  • Employee must have a minimum of 2,000,000 SF of geomembrane installation on their resume.
  • QC Level 3: 
    • Employee must meet QC Level 2 criteria.
    • Employee must be an IAGI certified welding technician.
    • Employee must have a minimum of 4,000,000 SF of geomembrane installation on their resume.

APPLY